2016 1(17)

Back to table of content

   Short abstract

 

Pages:

35 - 41

Language:

RU

Ref.:

29


Click to get extended abstract


Download paper: [RU]

2016_1(17)_4.pdf

 

 

AN EXPERIMENTAL INVESTIGATION OF R134A REFRIGERANT HEAT TRANSFER IN THE CHANNELS WITH TWISTED TAPES INSERTS

doi:10.23877/MS.TS.25.004

Tarasevich S.E., Shishkin A.V., Yakovlev A.B.

Kazan National Research University named after A.N.Tupolev (KAI), Kazan, Russia


Citation:

Tarasevich, S.E., Shishkin, A.V. and Yakovlev, A.B., (2016) An experimental investigation of R134a refrigerant heat transfer in the channels with twisted tapes inserts, Modern Science: Researches, Ideas, Results, Technologies, Iss. #1(17), PP. 35 - 41. doi: 10.23877/MS.TS.25.004.


Keywords:

heat transfer; cooling agent; channel; inserts; twisted tape


Abstracts:

In this paper, we present the results of an experimental study of heat transfer during the flow of refrigerant R134a in channels with inserted twisted, smooth and finned bands under conditions of forced convection.


References:

  1. Popov I.A., Makhyanov Kh.M., Gureev V.M. Fizicheskie osnovy i promyshlennoe primenenie intensifikatsii teploobmena / Pod obshch. red. Yu.F. Gortyshova. - Kazan: Tsentr innovatsionnykh tekhnology, 2009. - 560 s.

  2. Giniyatullin A.A. Teplootdacha i gidravlicheskoe soprotivlenie trub so vstavkami v vide orebrennykh skruchennykh lent. Kazan. 2015. 268 s. dis. kand. tekhn. nauk: 01.04.14.

  3. Nithiyesh C. Kumar, Murugesan, P. Review on Twisted Tapes Heat Transfer Enhancement / Int.J. Of Scientific & Engineering Research, vol. 3, №4 (2012).

  4. Ferroni, P., Block, R.E., Todreas, N.E., Bergles, A.E. Experimental evaluation of pressure drop in round tubes providedиwith physically separated, multiple, short-length twisted tapes / Experimental Thermal and Fluid Science, 35 (2011) 1357-1369.

  5. Yadav, A.S. Effect of Half Length Twisted-Tape Turbulators on Heat Transfer and Pressure Drop Characteristics inside a Double Pipe U-Bend Heat Exchanger / Jordan Journal of Mechanical and Industrial Engineering, vol. 3, № 1 (2009), pp. 17-22.

  6. Wang, Y., Hou, M., Deng, X., Li L., Huang, G.,Huang, H., Zhang, G., Chen, C., Huang, W. Configuration optimization of regularly spaced short-length twisted tape in a circular tube to enhance turbulent heat transfer using CFD modeling, Applied Thermal Engineering, vol. 31 (2011), pp. 1141-1149.

  7. Eiamsa-ard, S., Thianpong, C., Promvonge, P. Experimental investigation of heat transfer and flow friction in a circular tube fitted with regularly spaced twisted tape elements, International Communications in Heat and Mass Transfer, vol. 33 (2006), pp. 1225-1233.

  8. Saha, S.K., Dutta, A., Dhal, S.K. Friction and heat transfer characteristics of laminar swirl flow through a circular tube fitted with regularly spaced twisted-tape elements, International Journal of Heat and Mass Transfer, vol. 44 (2001), pp. 4211-4223.

  9. Eiamsa-ard, S., Wongcharee, K., Sripattanapipat, S. 3-D Numerical simulation of swirling flow and convective heat transfer in a circular tube induced by means of loose-fit twisted tapes, International communication in Heat and Mass Transfer, vol. 36 (2009), pp. 947-955.

  10. Thianpong, С., Eiamsa-ard, P., Wongcharee, K., Eiamsa-ard, S. Compound heat transfer enhancement of a dimpled tube with a twisted tape swirl generator, International Communications in Heat and Mass Transfer , vol. 36 (2009), pp. 698-704.

  11. Wongcharee, K., Eiamsa-ard, S. Enhancement of heat transfer using CuO/water nanofluid and twisted tape with alternate axis, International Communications in Heat and Mass Transfer, vol. 38 (2011), pp. 742-748.

  12. Eiamsa-ard, S., Promvonge, P. Performance assessment in a heat exchanger tube with alternate clockwise and counter-clockwise twisted-tape inserts, International Journal of Heat and Mass Transfer, vol. 53 (2010), pp. 1364-1372.

  13. Seemawute, P., Eiamsa-ard, S. Thermohydraulics of turbulent flow through a round tube by a peripherally-cut twisted tape with an alternate axis, International Communications in Heat and Mass Transfer, vol. 37 (2010), pp. 652-659.

  14. Eiamsa-ard, S., Seemawute, P., Wongcharee, K. Influences of peripherally-cut twisted tape insert on heat transfer and thermal performance characteristics in laminar and turbulent tube flows, Experimental Thermal and Fluid Science, vol. 34 (2010), pp. 711-719.

  15. Murugesan, P., Mayilsamy, K., Suresh, S., Srinivasan, P.S.S. Heat transfer and pressure drop characteristics in a circular tube fitted with and without V-cut twisted tape insert, International Communications in Heat and Mass Transfer,vol. 38 (2011), pp. 329-334.

  16. Murugesan, P., Mayilsamy, K., Suresh, S., Srinivasan, P.S.S. Heat Transfer And Pressure Drop Characteristics of Turbulent Flow in a Tube Fitted With Trapezoidal-Cut Twisted Tape Insert, International Journal Of Academic Research, vol. 1 №1 (2009), PP. 123-128.

  17. Ahamed, J.U., Wazed, M.A., Ahmed, S., Nukman, Y., Tuan Ya, T.M.Y.S., Sarkar, M.A.R. Enhancement and prediction of heat transfer rate in turbulent flow through tube with perforated twisted tape inserts: a new correlation // ASME J. of Heat Transfer, № 133, 2011.

  18. Chang, S.W., William Lees, А., Chang, H.T. Influence of spiky twisted tape insert on thermal fluid performances of tubular air-water bubbly flow, International Journal of Thermal Sciences, vol. 48 (2009), pp. 2341-2354.

  19. Chang, S.W., Yang, T.L., Liou, J.S. Heat transfer and pressure drop in tube with broken twisted tape insert, Experimental Thermal and Fluid Science, vol. 32 (2007), pp. 489- 501.

  20. Eiamsa-ard, S., Wongcharee, K., Eiamsa-ard, P., Thianpong, C., Heat transfer enhancement in a tube using delta-winglet twisted tape inserts, Applied Thermal Engineering, vol. 30 (2010), pp. 310-318.

  21. Promvonge, P., Pethkool, S., Pimsarn, M., и др. Heat transfer augmentation in a helical-ribbed tube with double twisted tape inserts // J. of Int. Communications in Heat and Mass Transfer, № 39, 2012. С. 953-959.

  22. Hong, M., Deng, X., Huang, K., Li, Z. Compound heat transfer enhancement of a converging-diverging tube with evenly spaced twisted-tapes, Chinese Journal of Chemical Engineering, vol. 15 №6 (2007), pp. 814-820.

  23. Promvonge, P., Eiamsa-ard, S. Heat transfer behaviors in a tube with combined conical ring and twisted-tape inserts, International Communications in Heat and Mass Transfer, vol. 34 (2007), pp. 849-859.

  24. Guo, J., Fan, A., Zhang, X., Liu, W. A numerical study on heat transfer and friction factor characteristics of laminar flow in a circular tube fitted with center-cleared twisted tape, International Journal of Thermal Sciences, vol. 50 (2011), pp. 1263-1270.

  25. Salman, S.D., Kadhum, A.A.H., Takriff, M.S., BakarMohamad, A. CFD Simulation of Heat Transfer Augmentation in Constant Heat-Fluxed Tube fitted with Baffled Twisted Tape Inserts, Australian Journal of Basic and Applied Sciences, 7(8): 488-496, 2013.

  26. Tarasevich S.E., Shishkin A.V., Yakovlev A.B. Stend dlya eksperimentalnogo issledovaniya kipeniya freonov v razlichnykh kanalakh // Vestnik KGTU im.A.N. Tupoleva, №2, vyp. 2, 2013, pp. 60 - 62.

  27. NIST Reference Fluid Thermodynamic and Transport Properties-REFPROP Version 9.1, April, 2013.

  28. Mikheev M.A., Mikheeva I.M. Osnovy teploperedachi [Basics of heat transfer]. - M.: Energiya, 1977. - 344 S.

  29. Manglik, R.M. Bergles A.E. Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes: part II - transition and turbulent flows // ASME Journal of Heat Transfer, Т. 115, № 890, 1993.

 

 
     

© SPIC "Kappa", LLC 2009-2016